Tag : tips

post image

Get Rid of Molds: Effective Tips to Avoid Moisture Inside Your House

Mold can be unhealthy and damaging when it grows undetected in your home. It can grow anywhere such as carpet, clothing, and even in those places, you can’t see the backside of drywall and above ceiling tiles. In order to prevent mold, you have to control the moisture in your house. Before it becomes a bigger problem in your house, it is best to prevent it.

Check out the following ways to avoid moisture indoors, as well as the mold that thrives on it:

Correct the problem areas in your house

While it’s almost impossible to mold-proof your home, the best you can do is to make it mold-resistant. So, conduct an audit of your home and identify those problem areas. Try to check if the basement floods or if there’s a frequent condensation on an upstairs window. You can install mold-resistant products or repair the damaged gutters.

Dry the wet areas immediately

Address those wet areas immediately. Take note that mold can’t grow without moisture. Dry right away the leakage into the basement after a heavy rainfall, accumulation of water from a leaky pipe, and even a spill on the carpet within a day or two. If your house has experienced a flood, remove those water-damaged carpets, bedding, and furniture if they can’t be completely dried.

Opt for mold-resistant products for your home

moldsWhether you are building a new home or doing a renovation, opt for mold-resistant products such as mold-resistant drywall or mold-resistant Sheetrock. You can also choose mold inhibitors for paints. Those areas in your house which are prone to wetness, such as bathrooms, laundry rooms, basements, and kitchens, moisture-resistant drywall helps a lot.

Have proper ventilation to prevent moisture

Ensure that your daily activities such as cooking dinner, taking a shower, or doing a laundry does not incite mold by having proper ventilation in your bathroom, kitchen, and laundry room.

Track the humidity inside your house

It is recommended by the EPA that the indoor humidity should be between 30 and 60 percent. Try to have a moisture meter which is available in your local store in order to measure humidity.

When talking about the molds, it is very important to ensure that your plumbing system is in great working condition and doesn’t leak. Leakage can be a great source of molds. So, make sure that your pipes are in good condition through proper maintenance. Work with the best plumbing services in Sydney for reliable plumbing fixtures. Check out our site at http://www.youplumbing.com.au for more info of our services.

post image

Tips to Fix Low Water Pressure Problems

Poor water pressure is really disappointing, and can be really unsatisfying. However, there are several ways to resolve such an issue and finally achieve a healthy flow of water around your home. Here are some fixes for your low water pressure problems!

Clear tplumbing pipehe clogs
Your pipes can develop a buildup of mineral deposits over time, resulting to clogging. This prevents the water from flowing freely and in extreme cases, you may need to replace sections of pipe. However, there are some simple fixes to prevent this sort of clogging occurring. You can take care of clogs at your system’s exit points by dissolving those buildup minerals inside your faucet fixtures and shower heads. A simple fix is to place an open zip-lock bag filled with vinegar over your showerhead or faucet. Tie it and leave it overnight to soak. The next morning, simply rinse off your cleaned fittings. If this doesn’t work, try using drain cleaner fluid. If your pipes are still blocked, it’s time to call a plumber!

 

Check the water valve if it’s completely open
Your house has a main water valve which is usually located near the meter. Its function is to control the flow of water into your home’s pipes. Check to see if it’s completely open. There are times that it may get accidentally turned off during repairs and maintenance without the homeowner’s knowledge. Sometimes, the valve is just partially opened, resulting to restricted flow and reduced pressure.

Replace the regulator
A lot of houses have a regulator especially those that rely on public water. Its function is to eleaknsure that the water doesn’t rush through the pipes. An indication that something is wrong with the regulator is the drop in water pressure, which affects some or all of the fixtures in your home. You can try to reset or replace this part.

Look out for leaks
Another tip is to look out for leaks in your water system. To find out if your main pipe has any damage, shut off all your faucets. Then, turn off the water valve in your home and take note of the number that appears on your water meter. Check the meter again after two hours. If there’s an increased reading, it is a sign of a leakage. It’s time to call a professional if a leak is present..

The tips mentioned above will help you find out and fix some issues with low water pressure in your house. However, there are some problems that really need a professional to fix. With our extensive experience in the plumbingndustry, we have refined our skills and have a team of professional, reliable and friendly plumbers dedicated  in providing exceptional service. Check out our site at http://www.youplumbing.com.au for more info of our services.

August 2019
S M T W T F S
« Jun    
 123
45678910
11121314151617
18192021222324
25262728293031