Tag : water-pressure

post image

Time to fix your Water Pressure Issues

Either low water pressure or high water pressure means there could be a problem with your household plumbing. So don’t hesitate to spend some time testing your water pressure, find out the cause of the problem and do something to set the right pressure that you need.

Low pressuredrops-of-water-578897_640

You may notice low water pressure more often in the shower as the water is flowing slowly and it’s hard to rinse away soap and the kitchen sink and storing water might take forever. To determine if the water pressure is right, you may use a water pressure gauge that you may purchase from any plumbing shop in Australia.

A leaky pipe would mean wasting water, increasing your bill and cause potential damage to your home. To check a leak, turn off first all appliances that use water and see water meter reading. For two hours, stop using water and see if the meter reading increases. If it does, then there’s a leak.

Low pressure is a result of different factors including mineral deposit from hard water and other pipe restrictions, and even a low water municipality. For low water municipality, you can fix the low pressure by using pressure tank where you can raise water pressure in your fixtures automatically.

High Pressure

Check if you have excessive water pressure. You will feel that water comes too hard from the fixture or you often hear a loud sound every time you turn off the faucet. Several reasons are behind high water pressure. These include severe strain on pipes, fixtures and fittings, low level home location or proximity to a huge building with great water needs.

Hire a plumber for pressure regulator installation on your main line. This is the most efficient way to combat high pressure and save your pipes from further damage.

For more information visit us at info@youplumbing.com.au

post image

Tips to Fix Low Water Pressure Problems

Poor water pressure is really disappointing, and can be really unsatisfying. However, there are several ways to resolve such an issue and finally achieve a healthy flow of water around your home. Here are some fixes for your low water pressure problems!

Clear tplumbing pipehe clogs
Your pipes can develop a buildup of mineral deposits over time, resulting to clogging. This prevents the water from flowing freely and in extreme cases, you may need to replace sections of pipe. However, there are some simple fixes to prevent this sort of clogging occurring. You can take care of clogs at your system’s exit points by dissolving those buildup minerals inside your faucet fixtures and shower heads. A simple fix is to place an open zip-lock bag filled with vinegar over your showerhead or faucet. Tie it and leave it overnight to soak. The next morning, simply rinse off your cleaned fittings. If this doesn’t work, try using drain cleaner fluid. If your pipes are still blocked, it’s time to call a plumber!


Check the water valve if it’s completely open
Your house has a main water valve which is usually located near the meter. Its function is to control the flow of water into your home’s pipes. Check to see if it’s completely open. There are times that it may get accidentally turned off during repairs and maintenance without the homeowner’s knowledge. Sometimes, the valve is just partially opened, resulting to restricted flow and reduced pressure.

Replace the regulator
A lot of houses have a regulator especially those that rely on public water. Its function is to eleaknsure that the water doesn’t rush through the pipes. An indication that something is wrong with the regulator is the drop in water pressure, which affects some or all of the fixtures in your home. You can try to reset or replace this part.

Look out for leaks
Another tip is to look out for leaks in your water system. To find out if your main pipe has any damage, shut off all your faucets. Then, turn off the water valve in your home and take note of the number that appears on your water meter. Check the meter again after two hours. If there’s an increased reading, it is a sign of a leakage. It’s time to call a professional if a leak is present..

The tips mentioned above will help you find out and fix some issues with low water pressure in your house. However, there are some problems that really need a professional to fix. With our extensive experience in the plumbingndustry, we have refined our skills and have a team of professional, reliable and friendly plumbers dedicated  in providing exceptional service. Check out our site at http://www.youplumbing.com.au for more info of our services.

post image

Water Pressure Problems

Water pressure problems at home are the most common and most dreadful problems so far. Showers and the rest ofwater-pressure-problems-sydney the fixtures at home become less satisfying and doing the dishes become even more of a chore than ever because of these problems. Water problems become worse because there are people who do not have any idea how to fix them or even keep track of their plumbing issues. There are, however, many ways for you to be able to make your water transition from bad to super bad.
When it comes to water pressure in urban areas, this is what happens. Most of the people in these areas get their water from the municipal water company. Water pressure is very high in the main line which is underground. Due to extensive friction, water loses its pressure from the main line to your house. The smaller space, the more friction it can get. This is why when it comes off your faucet; the water pressure seems to be too slow.
In most cases, there are blockages which serve as the major problem and the major issue in terms of the water pressure problem. Chemical build-up caused by the small amounts of chemical deposits that water leave can be the cause of low water pressure. Only chemicals can be used to break down or flush out these deposits.
If the water pressure is consistently good then suddenly becomes poor, then the problem might be with the main line and not within your home.
With the water tank which is one of the aids in providing water for tank water users. The tank may be too small to provide enough water and cause the pressure to go high, the tank might be leaking, sediment in the lines, filters dirty in the pump, or issues with the pump. When this happens, all you can do is to have your tank examined by licensed and professional plumbers for leaks and other problems.

November 2019
« Jun